Unpacking your Dovre 250
Your Dovre 250 is constructed from high-grade quality cast iron and is
therefore not light in weight. We recommend that 2 people are
available to handle the stove.
Care should be taken not to break the glass whilst handling the
appliance.
Before taking your Dovre to its installation location, remove the stove
from its outer packing and timber pallet. Stand the stove in the upright
position, protecting carpets or other floor coverings with rigid
cardboard. The stove carton is ideal for this purpose.
Locate the small green quality control slip and retain for future
reference.
Getting the best from your Dovre 250
There are 3 golden rules to follow:
1. USE GOOD FUEL - NEVER BURN UNSEASONED OR DAMP WOOD
2. YOU MUST HAVE A GOOD CHIMNEY DRAUGHT - NEVER
USE YOUR DOVRE STOVE WITH A POOR CHIMNEY
3. AVOID OPERATING THE STOVE FOR LONG PERIODS ON
CONTINUOUS LOW TEMPERATURE
USING SMOKELESS FUELS
Your Dovre 250 is capable of burning a wide variety of smokeless fuels
but the availability of different fuels varies from area to area. Seek
advice from your local fuel merchant and try out different fuels by
buying in small quantities until you find the fuel best suited to your
Dovre.
THE USE OF BITUMINOUS COAL AND PETROLEUM BASED FUELS IS
PROHIBITED.
Location for Installation
The location in which your stove is to be installed will of course
depend on the chimney available. If you do not have a chimney, there
are a number of prefabricated flue systems available and your Dovre
dealer will be pleased to offer guidance on the subject.
Building Regulations must be observed when considering the location
of your Dovre 250. More precise information can be found later in this
manual but it is important to ensure that a suitable hearth, complying
with Building Regulations, is available.
NEVER ALLOW A MECHANICAL AIR EXTRACTOR TO BE USED IN THE
ROOM OR ADJOINING ROOMS AS THIS COULD CAUSE THE
APPLIANCE TO EMIT SMOKE INTO THE ROOM.
Assembly
FITTING THE FLUE CONNECTOR
If your Dovre 250 is to be connected to the chimney via the top flue
connector, proceed as follows:
• Apply a thin and even coat of fire cement to the flanges on the
flue spigot and the circular flue blanking plate.
• Attach the flue spigot to the top opening in the stove, using the
2 nuts and bolts (M8 x 25CSK slotted) supplied.
• Attach the circular flue blanking plate to the rear opening of the
stove using the retaining bar and (M6 x 25) bolt supplied.
• Ensure that both flue spigot and blanking plate are securely
tightened and correctly sealed with the fire cement.
If your Dovre 250 is to be connected to the chimney via the rear flue
connector, proceed as follows.
• Apply a thin and even coat of fire cement to the flanges on the
flue spigot and the circular flue blanking plate.
• Attach the flue spigot to the rear opening in the stove, using the
2 nuts and bolts (M8 x 25CSK slotted) supplied.
• Attach the circular flue blanking plate to the top opening of the
stove using the retaining bar and (M6 x 25) bolt supplied.
• Ensure that both flue spigot and blanking plate are securely
tightened and correctly sealed with the fire cement.
3
ASHPAN
OPERATING TOOL
REAR BURN PLATE
TOP BAFFLE
PLA
TE
FIREBRICK
LOG
GUARD
Fig 2 - STOVE COMPONENTS
(8 pages)
(64 pages)
(136 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels